NC-A Medium Plate Series Servo Feeder For Sheet Metal Material Thickness: 0.3-3.5mm

Medium Sheet Metal Coil NC Feeder For Punch Press Machine

Features:

1.Suitable for different thickenss, length of material for feeding processing.

2.Suitable for high speed and lenth feed, improve productivity and feed accuracy.

3.Simple operation panel, with the feeding length and feeding speed of the key word, the operator can be arbitrarity set, quickly and accurately, feeding length 0.1mm-9999.99mm.

4.Pneumatic relaxation (relax point accurate), length-term use, low failure rate.

5.High-quality, brushless servo motor drive, effectively shorten the delivery, adjustment and testing of the time.

6.The use of a high degress of decoder, feedback accurate, feeding accuracy.

7.With synchronous belt transmission, can eliminate the gear clearance, little abrasion, no noise, no lubrication, safety and environmental protection.

8.Motor built-in, to avoid handling and decoration damaged.

Feeding Process

Product Description

·Control panel

1. The human-machine interface adopts Taiwan PanelMaster 's 7-inch high-definition large screen with uniform color and fine texture.

2. The switch adopts sliding contact with self-cleaning function. 

3. The contact adopts a ketone-based composite point, which has strong electrical conductivity and large carrying current, and its life span is 1 million times.

·Operating handle

1. The electric control box has a separate operation box , which is convenient to change position and save time. And it is water-proof and dust-proof, with high material strength, good electrical conductivity and long service life.

2. The electric control box is equipped with an emergency stop button, which is safe and reliable, and effectively reduces the opening and closing of the electric control box and protects the operation panel.  

·Feed roller, retaining wheel

The feeding roller adopts unpowered galvanized roller, which is integrally formed. Its surface is scratch-resistant and wear-resistant, and it uses mechanical bearing, flexible in rotation and durable in use.

·Feed cylinder

It adopts genuine AirTAC cylinder, alloy cylinder, hard oxidation, riveting without leaking.It uses solid aluminum for CNC precision machining. And the inner wall is smooth and not stuck.

·Servo motor

Both the servo motor and the driver use the Yaskawa brand (optional) to greatly improve the performance of the device and maximize device performance and solve problems.

·Transmission gear

The gear processing process includes the following processes: gear grinding processing - tooth surface processing - heat treatment- tooth surface finish grinding. After the above treatment, our gear grade can reach 6 grades, high wear resistance, high strength and long service life.

Specification Table:

Configuration Table:

NC Feeder Images

NC Servo Feeders find strategic applications in high-speed and high-precision stamping lines as press feeder, particularly in industries such as automotive manufacturing, electronics, and appliances. The precision and programmability of this type nc press feeder makes him ideal for producing intricate stamped parts with tight tolerances.

Case For Press feeder

Shipping & Delivery

FAQs

Why use mechanically releasing feeders for soft materials?

For such specially sensitive materials, mechanically releasing feeders (rollers and JNC type) are recommended, because mechanical release relies on an eccentric shaft to compress the material. After adjusting the locking screws, the gap between the two rollers will be slightly smaller than the material thickness, which can ensure feeding while protecting the material from damage. Ordinary NC feeders with pneumatic release let the upper roller drop directly onto the lower roller. Even with proper clamping force, they can easily damage soft materials.

What is ultra-high speed servo?

There are three release modes: pneumatic release, mechanical release, and ultra-high speed servo release. Their release speeds and feeding speeds increase in this order. Pneumatic release is completed by an air cylinder. Mechanical release is triggered when a protruding mechanism on the punch press touches the feeder. Ultra-high speed servo release is controlled by a servo motor.

Is mechanical high-speed release faster than ultra-high speed servo?

Speed order: pneumatic, mechanical, ultra-high speed servo. Ultra-high speed servo release is the fastest.

How to connect NC signal wires to SYA punch presses?

There are 4 signal wires in total: automatic feeding X0, clamping and releasing X1. They connect to S1, S2, S3 and S4 on the SYA punch press respectively. The wiring position varies for each punch press. Confirm with engineers before wiring.